The Telescopic Sight 6–24 x 72 from Carl Zeiss Optronics delivers outstanding optical images, particularly at high
magnification. Furthermore, they are quickly ready for use and easy to use. They not only meet all optical and ergonomic demands of snipers, they also set standards regarding handling and design.
The specified dimensions and MIL DOTS are based on a range of 100 m to the target.
6 to 24x magnification, an optically clear diameter of 72 and parallax compensation of 50 m to infinity provide the best conditions for precise target acquisition. The reticle illumination can be continuously adjusted, also permitting the observation, clarification and precise acquisition of targets during low-light conditions. These telescopic sights can also be supplied with a customer-specific reticle in addition to the standard MIL-DOT reticle.
The colored index marks and numeric values enable users to very easily see the current knob setting. This is vital for bullet drop compensation with adjustment ranges in the second image plane of 200 cm with the "6–24 x 72" (1 click = 1.0 cm/100 m).
ZEISS T*® multi-coating
allows this telescopic sight to achieve maximum imaging quality at very high magnification
even under the most difficult lighting conditions. Increased transparency in
the blue spectral range enables outstanding
recognition of details under low-light conditions. The MIL-DOT reticle is equipped with continuous
illumination. It can be dimmed as far as needed to prevent the reticle from over-illuminating the target
image even at night. The control electronics are equipped with a memory function which guarantees that
the same brightness level is used that was previously set. The lateral parallax
compensation minimizes target errors and ensures always optimal focus.
The Telescopic Sight 6–24 x 72 has been
expertly handcrafted (MIL-SPEC) and is made of the best materials. As with all ZEISS riflescopes,
it is watertight as per ISO 9022-81 and nitrogen-filled. It is recoil proof up to the highest calibers and
also meets the most stringent military
requirements despite the large optical design.
TECHNICAL DATA
|
Telescopic sight
|
6–24 x 72
|
|
Optical data
|
|
Scope magnification
|
6 to 24x
|
|
Reticle image plane
|
2nd image plane
|
|
Exit pupil in mm
|
12.0 to 3.0
|
|
Field of view (at 1000 m) in m
|
61 to 17
|
|
Resolution in arc seconds
|
min.2.5
|
|
Transmission in %
|
approx. 90
|
|
Super elevation angle adjustment in
elevation andazimuth per indentation in mrad
|
0.01 mrad (1 cm/100 m)
|
|
Max. adjustment path in cm/100 m:
elevation/azimuth
|
± 100/± 30
|
|
Parallax compensation in m
|
50 to ∞
|
|
Reticle
|
|
Distance between the dots (with V =
12x) in cm/100 m
|
10
|
|
Distance between the dots (with V =
12x) in cm/100 m
|
1
|
|
Dimensions, weight
|
|
Length/width/height each in mm*
|
380/94/94
|
|
Ring diameter (assembly) in mm
|
34
|
|
Weight in g
|
1100
|
|
Electrical data
|
|
|
Reticle illumination
|
red
|
|
Automatic reticle illumination
shutoff
|
After 3 hours (Set according to
customer requirements)
|
|
Low battery display
|
Optical, after activation of
reticle illumination
|
|
Power supply
|
Button cell 3 V CR 2032 to –20 °C,
alternatively: 3 V BR 2032 to –40 °C
|
|
Ambient conditions
|
|
Environmental test
|
DIN ISO 9022
|
|
Accessories
|
|
|
Polarizing filter
|
|
|
Yellow filter
|
|
|
Clampable/screwable honeycomb
filter
|
|
|
Clampable/screwable sun shield
|
|
|
Eye guard
|
*minor deviations depending on the position of the adjustment drives
Purchase includes Tool Kit Bag with Contents, Scope Protection Cap, Battery and Operating Instructions.
|
