Telescopic sight with integrated ballistic
calculator and internal reading
The 6–24x72 SAM telescopic sight ideally supports
snipers. Intelligent – direct and precise. SAM stands for Sniper Auxiliary
Module and is an optical targeting system with variable magnification (6-24x)
and a lens diameter of 72 mm. Most important: it features an integrated
ballistic calculator and practical interior display. It enables snipers to read
the different parameters directly in the visual field of the eyepiece by means
of a 7-segment display. Its sensors are located in the integrated ring mount
with a Picatinny interface. The parameters are measured there and then directly
projected into the visual field of the eyepiece via a menu: the current
settings of the elevation and azimuth turrets, the angle of fire, temperature
and air pressure. The cant is also shown and monitored. The 6-24x72 SAM is the
first telescopic sight with an integrated ballistic calculator. All data
gathered during assembly is automatically incorporated into the calculation of
the ballistic compensation. The assembly saves data for up to four different
types of ammunition. The ballistic calculator is amazingly simple to operate.
The user only has to go to the Calculation mode, enter the range to the target,
and the wind speed and direction using a setting wheel, and then confirm this
data. The ballistic program then calculates the compensation value and displays
it in the field of view. The user can do
without a variety of additional instruments, such as a thermometer, external
ballistic calculator and angle of fire compensator. This allows the sniper to
concentrate on the essentials – and, at the same time, avoid carrying heavy gear,
while also saving costs for expensive additional instruments. TECHNICAL DATA
|
Optical Data
|
|
|
Magnification
|
6x - 24x
|
|
Reticle image plane
|
1 + 2 image planes
|
|
Exit pupil in mm
|
12.0 - 3.0
|
|
Field of view at 1,000 meters
in meters
|
61 - 17
|
|
Adjustment range in cm
|
|
|
– elevation
|
+/- 100
|
|
– azimuth
|
+/- 30
|
|
Mounting
|
ZEISS ring assembly with integrated sensors
|
|
Reticle
|
|
|
Distance between the MIL-DOTS
in cm/100m
|
10
|
|
Distance between the centering
lines in m/100m
|
1
|
|
Dimensions
|
|
|
Length in mm
|
390
|
|
Width in mm
|
94
|
|
Height in mm
|
94
|
|
Electrical data
|
|
|
Reticle illumination
|
Red
|
|
Automatic shutoff
|
After 3 hours (set according to customer needs)
|
|
Battery capacity
|
The reticle illumination pulses when remaining
capacity reaches 10%.
|
|
Power supply
|
3 V CR 2032 button cell
|
|
SAM electronic data/ ballistic
calculator
|
|
|
7-segment display
|
Red
|
|
Automatic shutoff
|
After 3 minutes (set according to customer needs)
|
|
Battery capacity
|
The display pulses when remaining capacity
reaches 10%.
|
|
Temperature sensor
|
-40° / +70°
|
|
Angle sensor
|
+75° / -75°
|
|
Interface
|
Input/output interface
|
|
Environmental tests
|
|
|
Environmental tests
|
DIN ISO 9022 (excerpt)
|
|
Drawing number
|
|
|
Drawing number ZF 6 - 24 x 72
SAM operation left
|
330285-9902.000
|
|
Drawing number ZF 6 - 24 x 72
SAM operation right
|
330285-9901.000
|
|
Drawing number ZF 6 - 24 x 72
FF SAM operation right
|
330285-9905.000
|
|
Drawing number ZF 6 - 24 x 72
FF SAM operation left
|
330285-9906.000
|
|
Accessories
|
|
|
Polarizing filter
|
000000-0454.268
|
|
Yellow filter
|
330296-9026.000
|
|
Honeycomb filter, attachable
|
330296-9028.000
|
|
Honeycomb filter, screwable
|
330296-9032.000
|
|
Sun shield, attachable
|
330296-9027.000
|
|
Sun shield, screwable
|
330296-9024.000
|
|
Rubber eyecups
|
330296-9031.000
|
Purchase includes Tool Kit Bag with Contents, Scope Protection Cap, Battery and Operating Instructions.
|
